Nowadays, foggy days last longer as environmental pollution and hazy areas are getting wider. On rainy or foggy days, the limited visual range can easily result in trafiic accidents. But the newly-made laser fog light can solve such ploblem. It works by installing a red laser emitter at the back of car, which can generate a red fan-shoped beam in the air when bad days. It can be noticed more easily, and with great penetration, which can make car driver behind pay attention to keep safe distance. As the beam is on a slant, it won’t be shining to eyes. Besides, when you turn it on sunny days, you can only see a red line on the road, so license plate still can be seen clearly.
Product Specification
Product Name: Auto laser fog light
Laser Wavelength: 650mm (red)
Laser Power: 100mw
Laser Safety Class: Class II B
Installation Place: Upside and center of rear license plate
Working Temperature: -20~70 degree.
Working Voltage: 12V-24V
Tape Bearing Temperature: -40~120 degree
Waterproof Grade : IPX4
Connection: Parallel to number plate light,rear foglight, stoplight, warning light
Installation:
Rip the two-side tape then stick laser fog light to the upside center of the rear license plate. Connect the wire and turn it on. Adjust the angle of the beam, then tighten the screw.
Main Function:
On rainy, foggy, sndstom days, it works as a warning sign to effectively avoid traffic accidents that caused by driving too close. It can also be used as vehicle position warning and steering indicator at night. For new drivers, it will be helpful when you back your car into garage.
Pl note:
1. Protect your eyes frim laser light during installation;
2. Make sure it hasn’t covered the license plate after installation;
3. For DC12V~24V automobile.