Feature

●【Hongso Built in Thermostat Controlled Fan】Complete Assembly, Includes power supply (4 Feet Cord Length), Built in Thermostat, mounting screws. The dimensions of this kit is approx. 6 1/8"L x 5 5/16"W. The spacing of screw holes is approx. 5 1/2"L x 4 3/4"W
●【Applicable Models of Vent Free Heaters】Fits for Mr. Heater, Comfort Glow, Dyna-Glo, Dyna-Glo 30,000 BTU Heater. Fits for Dyna-Glo GBF30DTDG-2 30,000 BTU, Dyna-Glo BF30NMDG-4 30,000 BTU, Dyna-Glo BFSS30LPT-2P 30,000 BTU, Dyna-Glo IRSS30NGT-2N 30000 BTU, Dyna-Glo BF30PMDG 30,000 BTU and more
●【AUTO/OFF/Manual Operation Mode】Option of automatic or manual Operation, Fan automatically operates when the heater gets above 113 degrees Fahrenheit to ensure it’s blowing ONLY warm/hot air, improves heat distribution using it
●【Feature】It requires standard household current 120V~60Hz~18W~0.15A, All Components UL Listed. If you need UL listing we can send the copies to you for reference
●【Easy to install】Only a screwdriver needed, expert installation not required. Mounts to back of heater. Can be used on wall heaters that are wall mounted or floor mounted. If you have any other questions, please feel free to contact us


Description

11
11

Hongso Thermostat Controlled Fan

  • Dimension of this kit is approx. 6 1/8"L x 5 5/16"W

  • Fits for Mr. Heater, DYNA-GLO Vent-Free Space, Dyna-Glo, Dyna-Glo 30,000 BTU Heater
  • Fits for Dyna-Glo GBF30DTDG-2 30,000 BTU, Dyna-Glo BF30NMDG-4 30,000 BTU, Dyna-Glo BFSS30LPT-2P 30,000 BTU, Dyna-Glo IRSS30NGT-2N 30000 BTU, Dyna-Glo BF30PMDG 30,000 BTU and more
  • Please NOTE: All replacement blowers are aftermarket, not OEM equipment. Please compare the dimensions listed with your original, to ensure proper fitment, if you have any other questions, please feel free to let me know.

11

11

11

11

Built in Thermostat

  • Built in Thermostat: Built-in thermostat automatically cycles blower on and off, In AUTO MOD, fan operates automatically when the heater gets above 113 degrees Fahrenheit.

3 Operation Modes, UL Listed

  • All Components UL Listed.
  • 3 Operation Modes: On Manual mode the fan always ON. On AUTO MODE the fan to operate ONLY when it will blow warm/hot air. On Off MODE the fan will close.

Easy to install

  • Only a screwdriver needed when you install.
  • Mounts to back of heater.
  • Can be used on wall heaters that are wall mounted or floor mounted.

Improves heat distribution

  • Moves the heat around the room a lot, can improves whole room heating.
  • Energy Effencient and Saving Effencient.
11