Feature

●[FITMENT] This ignitor comes in its tube fully assembled and installs in seconds. The ignitor is rated at 400 watts and is compatible with all Country Pellet Stoves that require an ignitor including all Winslow models.
●[REPLACE PART NUMBER] H6005 Igniter replacement for Lennox PI40 PS40.
●[SPECIAFICS] 400 Watts, 120V AC, Proper terminal connections. Tube: 6 1/2″ Length x 7/8″ Diameter. Igniter: 5 1/2″ Length x 5/16″ Diameter.
●[NOTICE] Replacing the igniter in your Winslow PS40 Pellet Stove or PI40 Pellet. The hardest part of the job may just be getting access to the components. For those of you who have a pellet insert, the surround will need to be removed and the unit will need to be pulled forward slightly. For those with a freestanding stove, everything can be accessed through the side doors, however; provided you have enough room on the hearth, taking the back of the stove off will make things.
●[SERVICE GURANTEE] Package include: 1Pc x H6005 Igniter. If it fails on you stove, feel free to contact us any time.


Description

H6005H6005
Stove IgniterStove Igniter

PI40PI40
Specification:

Tube:

6 1/2” length x 7/8” diameter

Igniter:

5 1/2” length x 5/16” diameter

Replace part number:

H6005

Package include:

1 pc x H6005 Stove Igniter

H6005 Stove Igniter

The ignition is rated at 400 watts and is compatible with the Lennox PI40, PS40 compatible for rustic pellet fuel stoves that require an igniter, including all Winslow models.

H6005 igniter is made of quality materials and is durable pellet part. A perfect replacement for the stock part.

H6005 stove igniter uses heat shrink tubing at the solder joints to prevent breakage and is a very durable aftermarket part.

PS40PS40

For users of pellet-fueled inset fires, all sides of the cooker must be removed and the cooker pulled forward slightly.

For users with freestanding stoves, all parts can be accessed through the side doors; however, if there is sufficient space on the cooker, removing the rear of the cooker will suffice.

The igniter is located directly below the hopper in the centre of the cooker, and to access the igniter, the convection blower must be removed from its bracket.

On freestanding cookers, the convection blower is located on the right side of the cooker, facing the front.

On built-in cookers, the convection blower is located on the left side.

The positions of the blower mounting screws are also slightly different: one is in a vertical position and the other is in a horizontal position.

400 watts400 watts

igniterigniter

H6005 igniter H6005 igniter

stove igniterstove igniter

Quality material

Long lasting life

Easy to install

Quality control