Feature

●Vent Blower Accessory Kit: completely assembled including power cord, mounting screw; Suitable for heater without exhaust hole, compatible with Mr. Heater, Comfort Glow, Dyna Glo, Dyna Glo 30, 000 BTU heater
●2 In 1 Manual and Auto Mode: this fan is equipped with manual MAN and automatic AUTO modes; Set the switch to MAN for manual mode, allowing the fan to continuously run until the switch is returned to the OFF O position; Set the switch to AUTO for the automatic mode, which will turn the fan on and off based on ambient room temperature; It may take 5 to 10 minutes for the fan to come on when the heater is cold
●Easy Installation: the whole parts of the fan have been well assembled, you only need to use the screws attached to install it on the back of the heater, can be applied for wall mounted or floor plate heater
●Specification: the dimension of the blower fan is 6.1 x 5.1 x 5.3 inch (length x width x height), the spacing between the screw holes is 5.4 inch
●Package Content: 1 x vent blower fan accessory replacement with power cord, 4 x screws, 1 x manual instruction


Description

11

22

33

44

3 Operation Modes

3 modes to choose：manual mode / auto mode /off mode, easy to operate.

Built in Thermostat

Built-in thermostat automatically cycles blower on and off based on ambient temperature.

1.2M long cord

There is enough length to freely place the blower position

55
66
77
88
99