Feature
●(Set of 2 H8 H9 H11 CANBUS decoders) CAN Bus Error Free for H8 H9 H11 LED Headlights/DRL Kits Bulbs Anti-Flicker/Blinking PLZ check the bulb size is H8 H9 H11 before purchasing. Easy Installation: All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 15-20 minutes
●Fix: LED headlights/fog lights/DRL(daytime running lights) bulb Flashing or Flickering / Cancels Radio Interference and Light Turning off when Engine Starts / Cancels Error Message by OBC
●Extension cable length: 29.5inch. Can solve flickering, error code, non-function etc. problems of most European vehicles
●Cross Reference Number: H8, H9, H11, H8LL, H9LL, H11LL, etc. Disclaimer: This decoder can be compatible for most vehicles, yet we can not guarantee it fixes all problems. IF IT DOES NOT WORK FOR YOU, PLEASE CONTACT US AND WE WILL FIGURE OUT A SOLUTION!
●We offer ONE year warranty and lifetime support
Description
- Fully potted 6ohm resistance, for 9005/9006, H7,H11,H13: resistor-based CANBUS error decoder, also fix flickering
- High quality, engineered to last and be the safest way to add load equalizer to automotive lighting system: 3x more Surface Area for heat dissipation than traditional golden resistor
- The most thermally safe resistors on the market: Max. operating temperature about 200° F when properly mounted to metal surface, up to 100° F less than traditional golden resistor
- Super long reach: 36" cable measuring from bulb to resistor allowing resistor being mounted to a perfect metal flat spot (29.5" cable from resistor, 5.5" from male and female harness)
- Lower profile, about 1/3 flatter than traditionally golden resistor, greatly reduces the chance of touching any plastic parts Weather tight and sealed connectors between resistor and harness, weatherproof and
- DIY friendly, plug and play choices to either connector resistors to both high and low intensity for 3157 and 7443, or only to connector resistor to high intensity and to leave low intensity connector empty wrapped with electrical tape which is the case for most vehicles
- Current Draw: 2A @ 12V | 2.4A @ 14.4V. Each piece of resistor will add Load = 1 standard incandescent bulb (equivalent wattage: 24W)
- Dimension: 3.44"x1.53"x0.47"
Applications
- Fix LED flickering issue
- Stop Hyper Flashing
- Remove error code by BOC
- Cancel radio interference
- Plug-n-play, long wiring for the best easy installation
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Combo 9005 H11 LED | TS-CR H8/H9/H11 LED | S-HCR H8/H9/H11 LED | FL-BH H8/H9/H11 LED | AL-R H8/H11/H16 LED | AF H8/H9/H11 LED | |
|
|
|
|
|
|
||
| Customer Reviews |
— |
— |
— |
— |
4,316
|
— |
| Price | — | — | — | — | $29.98 | — |
| Package | 2pcs HB3/9005 + 2pcs H8/H9/H11 LED bulbs | 2pcs TS-CR vision H8/H9/H11 LED bulbs | 2pcs S-HCR vision H8/H9/H11 LED bulbs | 2pcs FL-BH vision H8/H9/H11 LED bulbs | 2pcs AL-R vision H8/H11/H16 LED bulbs | 2pcs AF vision H8/H9/H11 LED bulbs |
| Applications | High Beam + Low Beam | High Beam/Low Beam/Fog/DRL | High Beam/Low Beam/Fog/DRL | High Beam/Low Beam/Fog/DRL | Fog/DRL Lights | High Beam/Low Beam/Fog/DRL |
| Light Output | 5000lms/bulb | 5000lms/bulb | 5000lms/bulb | 6250lms/bulb | 2800lms/bulb | 4000lms/bulb |